FAW J6 Jiefang IV Series, Operation Manual

Page: 96 / 217

88
Jiefang J6 China IV, China V series instruction Maintenance
Adjustment direction of optical axis
Left headlamp
Up Down Left Right
Screw 1
Clockwise
Countercl
ockwise
Screw 2
Clockwise
Counterclo
ckwise
Adjustment direction of optical axis
Left headlamp
Up Down Left Right
Screw 3
Clockwise
Counterclo
ckwise
Screw 4
Countercl
ockwise
Clockwise
Caution
⊙
The adjustment rotating direction of the right
headlamp is opposite to that of the left one.
⊙
The direction of screw rotation is observed from
the front.
Replacing a light bulb
When each bulb of a combined lamp assembly
needs to be replaced, it is required to choose the
original lamp as much as possible.
When the bulb of the side marker lamp (side
lamp) needs to be replaced, the same power bulb
must be used, and it is prohibited to replace it with
high-power bulb.
Lubricating oil
Change the lubricating oil
When replacing, disassembling, and reassembling
the lubricating oil assembly, bearings, bushings, and
others should be lubricated, and the friction surface
of the parts with relative motion should be coated
with grease.
Check the oil level of each assembly regularly
and replenish it in time.
When the vehicle reaches the required mileage,
the lubricant or gear oil of the corresponding
assembly must be replaced.