94
Jiefang J6 China IV, China V series instruction
Maintenance
Emergency handling
Tire inflation
In the way of driving, if the tire is deflated, it
needs to be inflated in time.
Inflatable method: by using the tire inflation unit
in the vehicle tool, first connect one end to the tire
valve, then screw the other end into t the test
connector of the air reservoir and start the engine to
make the air compressor work. That is tire inflation.
Check the air pressure gauge after inflation and
adjust the air pressure to the specified value.
Replace tires (in a flat nut form)
Removal of tires
- When removing the tire, loosen the wheel nuts
first and then use the jack. Wheel nuts are
right-handed.
- Insert into the jack sleeve with the socket wrench
handle, shake the handle up and down, and extend
the jack head and lift the vehicle. When the tire is
slightly off the ground, unscrew the nut and remove
the tire.
- Then tighten the release valve clockwise to fix the
jack.
Warning
When using the jack, rotate the release valve slowly
to descend the vehicle. If tightening and twisting
too fast, the vehicle will drop sharply and the jack
will slip off, which is very dangerous.
Jack head
Summary of Contents for J6 Jiefang IV Series
