32
Jiefang J6 China IV, China V series instruction
Correct operation
Function switch
Located in the middle part of the instrument
panel.
- The number and arrangement of functional
switches are based on the actual vehicle
configuration.
Hazardous alarm switch
-
The switch is red.
- Press the switch and the left and right turning
lights flicker at the same time. Press again and turn
the left and right lights out at the same time.
Front fog lamp switch
- Use the front fog lamp when foggy or dusty.
- Press the front fog light switch and turn on the
indicator. Press it again, reset the switch and turn off
the indicator.
Rear fog lamp switch
- When foggy or dusty, use the rear fog lamp in
order to alert the rear vehicle.
- Only when the front fog lamp is turned on, the rear
fog lamp can be turned on by turning on the rear fog
lamp switch.
Working lamp control switch
- When the switch is pressed and connected, the
working lamp switch and the relay work together to
supply power for the rear working lamp.
Speaker change-over switch
- When the switch is pressed, the air horn is in a
working state. When the switch is pressed back, the
electric horn is in a working state.
Overturn switch of the cab
- After turning the ignition switch to the "ACC"
gear, press the switch, and then operate the cab
overturn mechanism outside the vehicle to achieve
the cab lifting and falling (see the section of "Cab
Overturn Mechanism").
Control switch of on-board crane
- When the switch is pressed, the control relay
contacts of the on-board crane are connected to
supply power to the control device of the crane.
Inter-axle differential lock switch
- Used to lock the inter-axle differential between the
middle axle and the rear axle.
- The indicator lamp illuminates when the
differential lock is engaged.
- Pressing the switch upward, the differential lock is
disengaged and the indicator lamp is off.
Inter-wheel differential lock switch
- The inter-wheel differential lock is used to lock
the inter-wheel differential between the middle and
rear axles at the same time.
- When the vehicle is in the stop state or at the
speed equivalent to walking, the inter-wheel
differential lock is operated by the push-key switch.
- After the vehicle passes the bad road, the
differential lock shall be deactivated immediately,
and the accelerator shall be released, and the clutch
shall be depressed, and the differential lock switch
shall be pressed back to the original position, and
the differential lock function shall be deactivated
after the switch indicator lamp is off.
Caution
⊙
Engage the inter-axle differential lock and then
engage the inter-wheel differential lock.
⊙
When the inter- wheel differential lock indicator
lamp is on, the vehicle must not turn.
Summary of Contents for J6 Jiefang IV Series
