FAW J6 Jiefang IV Series, Operation Manual

Page: 101 / 217

93
Jiefang J6 China IV, China V series instruction
Lu
b
rica
tin
g
o
il
Maintenance
- 9L: Double front axle steering vehicle with 110
cylinder diameter steering gear.
Oil: TF-8M hydraulic transmission oil
(condensation point is -32
℃
) according to
Q/CAM-217.
Oil change cycle:
- When the running-in of new vehicle is over
(traveling 2500km).
Hydraulic oil and filter element in the steering oil
tank is replaced when a vehicle travels every 20,000
km or for half a year. Oil change method:
- Push up the front axle.
- Remove the low pressure oil connector from the
steering gear.
- Turn the steering wheel left and right to the limit
position for 2~3 times And then drain the oil.
- Reinstall the connector.
Open the top cover of the steering tank, fill the
tank with hydraulic oil until the top cover of the
high filter core, and idle the engine.
Turn the steering wheel left and right to the
extreme position (staying no longer than 5 seconds),
and then oil continue to added to the tank until the
high filter element is covered with no drop and no
air bubble.
He oil level should be between the upper and
lower marking lines.