FAW J6 Jiefang IV Series, Operation Manual

Page: 62 / 217

54
Jiefang J6 China IV, China V series instruction Correct operation
Spare tire regulator
Remove the spare tire
- Use the special wrench in the on-board tool, turn
the connecting rod counterclockwise, and move the
spare tire bracket down. After the spare tire has
landed, remove the bracket from the spare tire.
Install a spare tire
- Hang a bracket on the spare tire, turn the
connecting rod clockwise with a special wrench to
raise the spare tire.
- When a spoke of the spare tire contacts the
supporting beam, the spanner is rolled to tighten the
spring. Finally, the connecting rod is tightened with
(100±10) Nm moment.
- Installing a side protective plate (optional): Install
the side protective plate, connect the side sign lamp
harness connector, insert fixed pins into fixed pin
holes at both ends, and then complete the
installation of the side protective plate.
Spark extinguisher switch (dangerous
chemicals)
Install the spark extinguisher at the rear end of the
exhaust tailpipe.
Use the device when driving dangerous chemicals
vehicles into flammable, explosive production areas
and fire-free areas such as flammable and explosive
chemicals depots.
Rotate the operating handle
①
of the spark
extinguisher to turn on/off the spark extinguisher.
Warning
Please use spark extinguishers in accordance with
the requirements of the state and relevant
departments.
Spare tire lifter
connecting rod
Spark extinguisher Exhaust tailpipe