144
Jiefang J6 China IV, China V series instruction
Maintenance
Caution
⊙
When checking the oil level, park the vehicle on
the horizontal road surface. After the engine is out
of flameout, it should wait for the oil level to be
stable and the transmission temperature to be
lowered to the normal temperature before
proceeding.
⊙
Fill the same type of lubricant as the original to
avoid chemical reaction.
⊙
Check whether the upper ventilation plug of the
selected shift actuator assembly is unobstructed. If
there is a blockage, it needs to be replaced.
Change the lubricating oil
- The lubricating oil in the transmission must be
drained before changing oil, and then new
lubricating oil is added.
- Fill new lubricants until the oil spills at the
transmission filling port.
- The lubricating oil should be replaced when a
vehicle travels every 50,000 km. Oil quantity
- about 15.8L.
Oil
- Shell: SPIRAX S3 AD 80W/90.
Caution
⊙
The lubricating oil shall be replaced when the
vehicle has been just stopped (the vehicle is hot).
⊙
Be careful not to be scalded by hot oil.
⊙
When replacing the lubricating oil, clear the
impurities adsorbed on the two oil discharging
plugs.
Vent plug
Oil drain
Summary of Contents for J6 Jiefang IV Series
