40
Jiefang J6 China IV, China V series instruction
Correct operation
Seat safety belt
Warning
Based on the fact, safety belt can effectively protect
passengers, avoid and reduce passenger casualties.
Therefore, in the spirit of the safety first spirit, the
Company reminds you that the safety belt must be
fastened when driving.
Fasten the safety belt
- Sit on the seat so that the back of body
comfortably rests on the back of the seat, slowly
pull out the tongue and insert the buckle until the
buckle sounds.
Caution
The position of safety belt shall be lowered to the
hip position as far as possible, and it shall not be
placed in the waist position. Then pull the shoulder
belt upwards so that the belt is tight.
Release the safety belt
- Press the red key in order to automatically
withdraw the woven tap.
Warning
⊙
During vehicle driving, it is not allowed to put
back the seat back; otherwise, when the emergency
braking occurs, the passenger's body will be
escaped from the safety belt, leading to accidental
serious injuries such as reined neck, and broken
cervical vertebra, etc.
⊙
When the safety belt is impacted by collision,
the safety belt shall be replaced even if the safety
belt is not found to be damaged.
⊙
When tightening the safety belt, make sure if the
safety belt is twisted. The twisted part has a small
area, so the local pressure applied to the body is too
large, and there is a danger.
Adjust
tightness
Too high
Correct
Push
Summary of Contents for J6 Jiefang IV Series
