PAGE 1 OF 4
0414 IH-4124
H-4124
3-IN-1 HAND TRUCK WITH
SOLID RUBBER WHEELS
1-800-295-5510
uline.com
TOOls NEEDED
14mm Wrench
10mm Wrench
AssEMBlY
AttAcH HAndlE
1. Slide handle onto the top rails of frame. Align holes
in handle and frame. Insert (2) 10mm bolts through
frame and handle and secure with locknuts.
(See Figure 1)
AttAcH nOSE PlAtE, FOldInG nOSE
ExtEnSIOn And AxlE SuPPOrtS
1. Position frame reinforcements against bottom of
frame rail. Slide nose plate into channel on frame
reinforcements. Keep bolt holes aligned.
(See Figure 2)
2. Align axle supports with outside rail of frame. Make
sure supports are positioned as shown.
(See Figure 2)
NOTE: Align top two bolt holes on axle support.
3. Insert (4) 14mm bolts through the axle supports,
frame, frame reinforcements and nose plate.
Hammer
Pliers
Figure 1
Figure 2
WARNING! Do not use power tools.
Pour le français, consulter les pages 3-4.
