Farmet FALCON 3 Operating Manual Download

Page: 87 / 99

Manual

FALCON 3 | 4 | 6 | 8

│

Disagree

about 50%

Bad dosages

required

Electronic

Check the sowing batch and set the sowing
method, or set it all again according to the
instructions.

Incorporated half

gears on the

dispenser

Mechanical

Check the sowing gears and the correct
setting of the dispenser.

Poorly

performed and

entered the seed

test

Electronic

Check the seed drill procedure. For example,
you can also exclude the bag weight option.
Perform the sowing test again.

Does not

approve

sowing up to

20%

Badly done seed

drill

Electronic

Check the seed drill procedure. For example,
you can also exclude the bag weight option.
Perform the sowing test again.

do not

correspond

to the

hectares

worked per

computer

It disagrees with
the speed of the
radar and reality

Electronic

Wrong insertion

of the machine

on the computer

Electronic

Summary of Contents for FALCON 3




































































































Search results

Summary of Contents for FALCON 3

Reviews:

Related manuals for FALCON 3

Brands by name

Popular brands

Farmet FALCON 3, Operating Manual

Search results

Summary of Contents for FALCON 3

Reviews:

Related manuals for FALCON 3

Brands by name

Popular brands