Farmet FALCON 3 Operating Manual Download

Page: 21 / 99

Manual

FALCON 3 | 4 | 6 | 8

│

6.4.

CONNECTING THE ELEKTRONIC UNIT



Connect the electronic unit of the machine only when the tractor is standing still and is secured against
movement and intervention by third persons.



Put the display unit to a place in the tractor where it will not obstruct the driver’s view and where it will
be in the visual field of the operator.



To connect the electronic unit, use the feeding cable that is included in the machine delivery.



The connecting cable must be connected directly to the tractor accumulator!



The connecting cable contains the required sockets for connecting the electronic unit.



Do not connect the connecting cable and the unit to any other connectors in the tractor.

ATTENTION! Check correct polarity of the cable!

Power Cabling

Pojis

Fuse
50 A, 15 A

Fuse
15 A

Fuse
50 A

Fuse

1 A

Terminal

Power supply

contact

Relay

ISO

Connection

Battery

contacts

Terminal

cable

Summary of Contents for FALCON 3




































































































Search results

Summary of Contents for FALCON 3

Reviews:

Related manuals for FALCON 3

Brands by name

Popular brands

Farmet FALCON 3, Operating Manual

Search results

Summary of Contents for FALCON 3

Reviews:

Related manuals for FALCON 3

Brands by name

Popular brands