Farmet FALCON 3, Operating Manual

Page: 84 / 99

Manual
FALCON 3 | 4 | 6 | 8
84
│
99
n. Fault Cause
Type of
cause Removal
1
The fan
speed
fluctuates
Incorrectly
adjusted fan
sensor
Electronic Sensor settings according to the instructions
Faulty fan sensor Electronic Check sensor function, replace
Incorrect or
insufficient oil
flow
Hydraulic
Checking the flow rate of the tractor
control, correct adjustment according to
tractor type
Small size of free
return quick
coupling
Hydraulic
The size of the free return quick coupler
must be min. ISO20
2
The beams
are in the
upper
position at
different
heights
Badly welded
beams, crooked
frames
Mechanical
Inspection of beams and frames, or
replacement
Unscrew one of
the lifting pistons
to the end
position
Hydraulic
Check the piston rods, check the nozzles to
prevent any of them from clogging
3
Beam of
sowing
coulters are
receding at
different
heights
Unscrew one of
the lifting pistons
to the end
position
Hydraulic
Check the piston rods, check the nozzles to
prevent any of them from clogging
Set different
depths of
stitches on
individual frames
Mechanical
Check the setting of the end depth stops,
correct setting on all the same
Set too much
pressure on seed
drills
Hydraulic
If the soil is very hard and too much
pressure is applied to the seed drill, you can
not cut any more
When standing
on the ground
and recessing the
bots.
Mechanical
Due to soil resistance, individual beams at
different heights can only be lifted so that
all the boots are evenly cut into the ground
and the beams align themselves
Collisions of
individual beams
between
themselves.
Mechanical
The beams are locked in place after the
recess. Sometimes you only need to climb
and the beams align.