Farmet FALCON 3 Operating Manual Download

Page: 25 / 99

Manual

FALCON 3 | 4 | 6 | 8

│

6.6.2

Connecting the pressure hose

Connect the pressure hose (outer

⌀

22 mm) with the small quick coupling to the tractor distributor.

Connect this hose to the circuit giving priority to the oil supply.

Picture 8 – Pressure hose connection

6.6.3

Commissioning

When setting the required fan revolutions, the hydraulic oil must be warmed up.

When commissioning the hydraulic drive, the fan revolutions (working air pressure on the pressure gauge
in the hopper) must be set gradually.

Fan revolutions (pressure on the pressure gauge) are set by regulating the oil flow rate in the tractor.

If the hydraulic drive is started with cold oil, it is necessary to increase the motor revolutions gradually
before the oil warms up.

During commissioning and the first handover, the technician in charge of the handover must inspect all
connections of the hydraulic drive and measure pressure in the free drain

hose. He must record the

obtained results in the handover protocol.

Free drain to the

tractor tank must

be all time

connected, even if

fan is not working

Summary of Contents for FALCON 3




































































































Search results

Summary of Contents for FALCON 3

Reviews:

Related manuals for FALCON 3

Brands by name

Popular brands

Farmet FALCON 3, Operating Manual

Search results

Summary of Contents for FALCON 3

Reviews:

Related manuals for FALCON 3

Brands by name

Popular brands