Farmet FALCON 3, Operating Manual

Page: 33 / 99

Manual
FALCON 3 | 4 | 6 | 8
33
│
99
7.5.1 Setting rail lines rhythm
This specific setting of the rail lines is accessed via the first screen where we press the button of the
relevant rail lines icon. Then press the button for rail lines setting (a symbol of rail lines with lower-case letter
“n” in the right bottom corner). There you select the required configuration of the rail lines rhythm; the
configuration depends on the versions (A, B, C) described above.
Line No.

Number of the rail line (number of passes of the machine per width of the
sprayer)
Length

Number of passes that determines the rail lines rhythm repetition
Left, Right

Determines the pass during which a rail line is created (left, right)
Individual Setting

Here you can choose your own settings
Individual steps for setting the correct rail lines rhythm
1. We know the width of the machine
2. We know the width of the sprayer
3. We know the number of rail flaps on the machine and we know exactly where they are located (which
side, number…)
4. We have to do a simple calculation
Structural width of the sprayer: Structural width of the machine
5. Select the rail lines rhythm on the appropriate screen based on the facts above