Farmet FALCON 3, Operating Manual

Page: 85 / 99

Manual
FALCON 3 | 4 | 6 | 8
85
│
99
4
From the
dispenser or
mixer, the
seed flies out
Clogged air
system
Mechanical
If the main air line is clogged from the
dispenser to the distributor, the seed can
not pass and flies out of the dispenser.
Too high airflow Mechanical
When the airflow is set too high, the mixer
nozzle can generate resistance and instead
of leaving the seed further into the
distributor, it flows into the mixer to swirl
and flutter out.
Too much seed
or fertilizer
Electronic
The mixer is beyond the limit of
functionality, it does not take more seed
and clogs. Reduce the sowing rate or add
more air if possible.
5
The
dispenser
motors do
not spin
after the
recess
Badly adjusted
antenna sensor
Mechanical Set the sensor so that the sensor turn on
Incorrectly
adjusted
pressure sensor
Hydraulic
If the sensor is set to low pressure, then at
any pressure tip the engine stops. The
sensor needs to be tightened.
6
Sowing
sensors
often report
a flow error
Incorrectly set
sensitivity to the
seed
Electronic
Check the sensitivity settings and change
the setting according to the instructions for
the type of seed