Manual
FALCON 3 | 4 | 6 | 8
68
│
99
Correct procedure for setting pressure and sowing depth:
1.
Set the required sowing depth.
2.
Decrease the pressure of drill coulters to minimum.
3.
Unfold the machine into the working position and travel a few meters.
4.
Check the required sowing depth.
5.
Keep pushing the section down.
6.
Turn the reducing valve to the right = the pressure will increase.
7.
When the setting is finished, lock the valve.
8.
To reduce the down pressure, lift the working section and release the reducing valve.
9.
Lower the section down = the pressure is reduced
If you cannot reach the required values, repeat the procedure with the following higher depth of sowing.
The optimal pressure setting is between
20 to 60 bar
with regard to the current soil conditions.
Summary of Contents for FALCON 3
