Farmet FALCON 3, Operating Manual

Page: 19 / 99

Manual
FALCON 3 | 4 | 6 | 8
19
│
99
6.2. CONNECTING THE HYDRAULICS
 Connect the hydraulics only if the hydraulic circuits of the machine and the tractor (aggregate) are without
any pressure.
 The hydraulic system is under great pressure. Check regularly for leakages and immediately eliminate any
visible damage to all distribution, tubes and screw joints.

When checking for and eliminating leakages, use appropriate equipment.
 Use the plug (on the machine) and the socket (on the tractor) of the same type of snap coupling when
connecting the hydraulic system of the machine to the tractor. Execute the connection of the snap
coupling of the machine to the hydraulic circuits of the tractor according to Tab. 4.
Tab. 4 - Connection of the hydraulic circuits and setting up the flow of oil
Circuit Plug Cover colour Oil flow direction Flow of oil
Hydraulic motor of the fan
ISO 12,5 red pressure tube
20 – 40 l/min
ISO 20 black open waste
Controls of the machine
hydraulics
ISO 12,5 blue pressure tube
50 – 60 l/min
ISO 12,5 blue reverse tube
Hydraulic drift drive ISO 12,5 green pressure tube 10 – 15 l/min
Micro drill ISO 12,5 black pressure tube 15 – 20 l/min
Flexi boards
ISO 12,5 white pressure tube 15 – 20 l/min
ISO 12,5 white reverse tube 15 – 20 l/min
Lifting the front section
ISO 12,5 yellow pressure tube
20 – 40 l/min
ISO 12,5 yellow reverse tube
In order to rule out unintentional movement of the hydraulics or movement caused by third persons
(children, passengers), the controlling distributors in the tractor must be secured or blocked and the
controlling unit switched off if the machine is not used or if it is in the transport position.
The parts of the hydraulic system of the machine that are under pressure must not be disassembled.
The hydraulic oil causes serious injuries when it penetrates the skin under the high pressure. In case of injury,
immediately seek a doctor.