Farmet FALCON 3, Operating Manual

Page: 86 / 99

Manual
FALCON 3 | 4 | 6 | 8
86
│
99
7
The machine
does not
unfolding as
it is, the
footpath
goes into a
collision with
the front
section
Disconnected or
faulty quick
couplings at the
front section
Hydraulic
Check the correct connection of the
hydraulic hose couplings to the front section
connection.
Faulty end valve
for unfolding the
front section
Hydraulic
Check that the end valve is not stuck or the
stop is in the correct position.
8
The wheels
are above
the surface,
they do not
rotate and
do not work
Poor pressure set Hydraulic
Set either very low pressure or very large
against a very hard surface. Check and
optimize.
9
The main
wheels of
the main
cylinder are
in the air
the machine is
not unfolded
Hydraulic
The machine is not fully tilted, not tilted by
the appropriate hydraulic function.
10
Error: The
dispenser
does not
rotate
Allowed
mechanical
coupling of doser
and engine
Mechanical
Check the clutch to see if it is allowed, so
the motor rotates and the dispenser is
standing. Tighten the clamp on the coupling.
Incorrectly
adjusted
dispenser sensor
Electronic
The engine rotates, but the sensor does not
respond and does not count the speed, the
system behaves as though the engine was
standing. Check whether the diode is
illuminated on the sensor or adjust the
sensor distance from the star according to
the instructions.