Farmet FALCON 3, Operating Manual

Page: 11 / 99

Manual
FALCON 3 | 4 | 6 | 8
11
│
99

The operator must secure the arms of the rear TPS of the tractor in the transport position when
operating on ground communications. At the same time, the arms of the rear TPS of the tractor must
be secured against swinging sideways.

It is strictly forbidden to transport people or load on the machine or connect another machine, semi-
trailer or additional equipment to it.

The maximum transport speed during travelling on roads is 25 km/hour.

Ban of transport with decreased visibility!
The machine may only be driven on roads when equipped with air brakes (the customer receives a
certificate of roadworthiness). Otherwise, it is prohibited to drive the machine on roads!
E. WORK SAFETY LABELS
Warning safety labels are used for the protection of the operator.
The following applies generally:
A) Strictly observe the warning safety labels.
B) All safety instructions also apply to other users.
C) If the aforementioned “SAFETY LABEL” located on the machine is damaged or destroyed, THE OPERATOR
MUST REPLACE IT WITH A NEW ONE!!!
The position, appearance and exact meaning of work safety labels on the machine are given in the
following tables (Tab.2/p.11-12) and the picture (Picture 1,2/p.13).
Tb.2 - Self-adhesive warning safety labels located on the machine
WARNING SAFETY LABEL TEXT TO THE LABEL
POSITION ON THE
MACHINE
Read carefully the operating manual before
manipulation with the machine.
Observe the instructions and safety rules
when operating the machine.
P 1 H
Driving the machine and transportation on
its construction is strictly forbidden.
P 37 H
When connecting and disconnecting, do not
enter the area between the tractor and the
machine. Do not enter that area unless the
tractor and the machine are not moving and
the engine is off.
P 2 H
Stay beyond reach of the set Tractor –
Agricultural Machine when the tractor
engine is running.
P 6 H
Secure the axle of the machine against an
unexpected drop before its transportation.
P 13 H
Secure the machine against unwanted
movement.
P 52 H