FOR RESTRICTED USE only
Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
11-7
Print TOF and Print EOF Alignment Procedures
The Print TOF and Print EOF adjustment procedures must be performed as a single
alignment process. The goal of these procedures is to align the printed image to precisely
line up with the edges of the card as shown below. Notice that when aligned properly, the
test print's Alignment Arrows will fall just inside the edges of the card.
This information pertains to the two procedures on the next page:
•
Alignment Test Image:
The alignment test image is designed for setting these
parameters. Be sure to run this test after each adjustment. Run the Alignment Test
Image by selecting the following options:
MENU
,
Print Test Image
and
Gray/Align
YMC/K
•
Value and Settings Changes:
Change the settings in the procedures below by
choosing the following options:
MENU
,
Setup Printer
,
Print Settings
and the parameter
to be changed. Change the value by pressing the appropriate scroll button and press
SELECT
to save the value.
