FOR RESTRICTED USE only
Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
7-10
Reviewing the Telnet Command Table (continued)
Telnet Command
Command Purpose
Command Format
contact
Set the contact string.
set sysinfo label [<STRING>]
location
Set the location string.
set sysinfo location [<STRING>]
label
Set the label string.
set sysinfo label [<STRING>]
sysinfo
from
Set all strings from
default or current
settings.
set sysinfo from default|current
name
Change the name of a
system log path
set syslog <LOG_NAME> name
<NEW_NAME>
type
Change the type of a
system log path. This
starts or stops logging
on start of jobs or on
faults.
set syslog <LOG_NAME> type
[[-]job] [[-]pfault]
dest
Change the destination
of a system log path.
This may be set to
none, e-mail, udp or
tcp.
set syslog <LOG_NAME> dest
none|email|udp|tcp
Change the e-mail
address for e-mail
notification for a
system log path. It
must specify a valid e-
mail address.
set syslog <LOG_NAME> email
<EMAIL>
udp
Specify the IP address
of the UDP system
logging program.
set syslog <LOG_NAME> udp
<IPADDRESS>
set
syslog
from
Restore system log
path settings from the
default or current
settings.
set syslog from default|current