Fagor QC-PDS, Hardware Manual

Page: 321 / 420

10
QC-PDS
HARDWARE
Ref.2003
· 321 ·
CONNECTION
DIAGRAMS
See example connection and handling diagrams in the following annexes:
ANNEX A1
.
Example handing and connection diagram for the QC-PS-025 power
supply: SAFETY EMERGENCY STOP. FAGOR
Q UER C US CNC + QC-
PS-025 + 2x QC-DR-

-FS2 + 1x QC-DR-

+

-FD2.
ANNEX A2
.
Example handing and connection diagram for the QC-PS-045 power
supply: SAFETY EMERGENCY STOP. FAGOR
Q UER C US CNC + QC-
APS-15 + QC-PS-045 + 2x QC-DR-

-FS2 + 1x QC-DR-

+

-FD2.
ANNEX A3
.
Example handing and connection diagram for the QC-RPS-

-F

power
supply: SAFETY EMERGENCY STOP. FAGOR Q UER C US CNC + QC-
APS3-15 + QC-RPS-

-F

+ 2x QC-DR-

-FS2 + 1x QC-DR-

+

-FD2.
DANGER.
Be aware that to comply with the European Machinery Directive, it usually
requires PL d or SIL 2 (milling machines and lathes). The QC-DR drive
achieves PL d or SIL 2
·
see models in the EC Declaration of Conformity
·
.
An external safety controller PL d or SIL 2 is necessary as well as bearing
in mind the concepts of chapter
9. FUNCTIONAL SAFETY
.
Note that the example diagrams provided here do not comply with
European Machinery Directive 2006/42/EC, since it does not take into
consideration the holding brake control by the external safety controller.