Faema SMART / A, Use And Installation

Page: 39 / 112

10
21 17 16
18
19
20
13 EN
English
How to access the programming function
To enter the programming mode, press push button ( 18 )
DQGNHHSLWSUHVVHGIRUDIHZVHFRQGVWKHEX]]HUVRXQGV
intermittently.
To exit the programming mode, after programming the
various drinks, press push button (
18 ) again.
“Before programming the coffee dispensing push
EXWWRQV¿OOWKH¿OWHUKROGHUZLWKWKHFRUUHFWVHUYLQJ
of ground coffee. Don’t use coffee grouts for pro-
gramming servings.”
)LWDQGWLJKWHQWKH¿OWHUKROGHU
10 ) on the coffee dispenser
unit, positioning the cup (or cups) under the nozzle (or
QR]]OHVRIWKH¿OWHUKROGHU
10 ).
Press (and keep momentarily pressed) the coffee
dispensing push button (
16, 17, 19
or
20
) corresponding
to the required serving to be programmed.
When the amount of coffee in the cup reaches the required
level, release the coffee dispensing push button.
Repeat the above operations for the other coffee push
buttons.
Note: if you make a programming mistake, use a new dose
of ground coffee and repeat the operation.
15. Programming the coffee measures
'RQRWUHPRYHWKH¿OWHUKROGHUEHIRUHWKH
coffee dispensing has completed.