Factory Five Racing Mk3 Roadster, Assembly Manual

Page: 62 / 277

62
www.factoryfive.com 508-291-3443
1. Position the Mustang pedal box on the two angled ¾” tubes over the driver’s feet, and attach using
two short
⅜ ” bolts and two washers to the front wall at the front of the foot box.
Positioning the pedal box
.
2.
There are four holes on the Mustang pedal assembly on top of the ¾” tubing. Mark these holes on the
tubes.
3. The right hole for the master cylinder must also be marked on the pedal box. Use the laser cut hole in
the foot box steel as a guide to mark the Mustang pedal box.
4. Mark the corner of the pedal box that sticks out past the front foot box plate. This will have to be
trimmed.