Factory Five Racing Mk3 Roadster, Assembly Manual

Page: 126 / 277

126
www.factoryfive.com 508-291-3443
Slide the nose on first with the body up in the air
.
Rear Quick Jack Bumpers
ATTENTION: If you ordered the optional chrome bumper assembly, follow the instructions for these
under the optional accessories section near the end of this manual. The quick jack bolts can be
installed from the outside of the car so the gas tank does not have to be dropped.
TOOLS:
9
/
16
” and ⅝ ”combination wrenches, ⅝ ” socket,
5
/
16
” hex key, floor jack.
PARTS: Quick jack bumper components (FFR# 10533)
1.
Lower the gas tank using a jack in the middle of the tank to hold it. You’ll need a
9
/
16
” wrench and
5
/
16
”
hex key. This is necessary in order to insert the bolts for the quick jacks into their holes.
2. Mount the rear quick jacks using the 3.75” and 1.75” stainless spacers with 4 washers on each long
bolt. Use a
⅝ ” wrench and ⅝ ” socket.
3. Raise and bolt the gas tank back into place.
4. Tighten the gas tank strap bolts with a
5
/
16
” hex key and
9
/
16
” wrench.
Side Body Mounts
Bolt
3.75” spacer 1.75” spacer
Nut
Body
Quick Jack
Washers
Frame