Factory Five Racing Mk3 Roadster, Assembly Manual

Page: 8 / 277

viii
Tools and Supplies List
The following lists detail the tools and supplies that are needed to build your kit. The “helpful” items are
not crucial to the assembly but make life easier. Home Depot HUSKY®, Sears CRAFTSMAN®, and
Snap-On

tools are all guaranteed for life and we’ve found them to be reliable tools.
Storage shelves for kit and running gear parts
Body storage area (can be outside)
SAE and metric socket set, a 52-piece set that includes an 18mm is a good choice
Deep sockets for some common sizes are helpful.
SAE Combination wrench set (
3
/
8
” –
15
/
16
”)
Metric combination wrench set (10mm – 18mm)
Full set of standard and Phillips head screwdrivers
Standard Hex key set
Long nose pliers, 4.5”
Snap ring pliers
Pop rivet tool with
1
/
8
” and
3
/
16
” heads
Drill
Drill bits (
3
/
32
”,
1
/
8
”,
9
/
64
”,
3
/
16
”,
7
/
32
”,
5
/
16
”,
7
/
16
”, ½”)
Caulk gun
24 oz. Plastic Dead Blow hammer
Razor knife
Wire stripper/crimping tool
⅞ ”, 1¼” and 2 ¼” hole saws (Body cut outs)
Bench top vise
Tape measure or straight edge ruler/T-square
Hydraulic floor jack
Engine hoist
6’
5
/
16
” chain (to lift engine)
4 Jack stands
Hack saw (metal blade)
¼” &
5
/
16
”Fuel/brake line bender (hand held)
Tube cutter
Jig saw (Body cut outs)
Torque wrench (Click style, ⅜ ” drive)
Eye protection
Gloves
Spring compressor (Mustang disassembly only)
Bucket
The thing between your ears