F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 6.62 -, Administrator'S Manual

Page: 76 / 397

76
Changing Settings That Have Been Modified During Installation
or Upgrade
If you want to change a setting that has been modified locally during
installation or upgrade, you need to mark the setting as
Final in the
restriction editor. The settings descriptions in this manual indicate the
settings for which you need to use the Final restriction. You can also
check in F-Secure Policy Manager Console whether you need to use the
Final restriction for a setting. Do the following:
1. Select the Policy tab and then select the setting you want to check.
2.
Now select the Status tab to see if the setting has been modified
locally.
„
If the setting is not shown in grayed font in the Status view, then
the product uses the setting from the base policy and therefore
the Final restriction is not needed.
„
If the setting is shown in normal black font, then the setting has
been modified locally. You must mark the setting as Final when
you change it.
4.7.2 Stand-alone Mode
To change F-Secure Anti-Virus for Microsoft Exchange settings in
stand-alone mode, open the F-Secure Anti-Virus for Microsoft Exchange
Web Console and select the variables you want to change from the
options tree. For detailed explanations of all variables, see
“
Administration with Web Console ” , 216 .
To view statistics for real-time scanning, select Summary on the options
tree. To reset all counters to zero, click Reset Statistics .
To view statistics for the latest manual scan, select Manual Scanning on
the options tree. The Manual Scanning property page displays the
following statistics: the number of processed mailboxes, the number of
processed Public Folders, the numbers of processed, infected, and
suspicious messages in mailboxes and in the Public Folders. Manual
scanning statistics are reset every time a new manual scan is performed.