F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 6.62 - Administrator'S Manual Download Page 209

Page: 209 / 397

CHAPTER 5

209

Centrally Managed Administration

5.5.2

Scan Engines

The

Scan Engines

table displays the scan engine statistics and

information.

Number of Scanned Files

The number of files that have been scanned.

Last Database Update

The last date and time when virus definition
database was updated.

Last Infection Found

The name of the last infection that was
encountered.

Last Time Infection
Found

The date and time when the last infection
was found.

Name

The name of the scan engine.

Version

The version number of the scan engine.

Status

The status of the scan engine, whether it has
been loaded and enabled, is loaded but
disabled, has not been loaded at all, or is
malfunctioning.

Last Database Update

The last date and time when virus definition
database was taken into use for this scan
engine.

Database Date

The date the virus signature database for
this scan engine was created.

Last Infection Found

Displays the last infection found by this scan
engine.

Last Time Infection
Found

Displays the date and time of the last
infection found by this scan engine.

Summary of Contents for ANTI-VIRUS FOR MICROSOFT EXCHANGE 6.62 -














































































































































































































































































































































































































Search results

Summary of Contents for ANTI-VIRUS FOR MICROSOFT EXCHANGE 6.62 -

Reviews:

Related manuals for ANTI-VIRUS FOR MICROSOFT EXCHANGE 6.62 -

Brands by name

Popular brands

F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 6.62 -, Administrator'S Manual

Search results

Summary of Contents for ANTI-VIRUS FOR MICROSOFT EXCHANGE 6.62 -

Reviews:

Related manuals for ANTI-VIRUS FOR MICROSOFT EXCHANGE 6.62 -

Brands by name

Popular brands