F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 6.62 -, Administrator'S Manual

Page: 120 / 397

120
You can specify where an alert is sent according to its severity level. You
can send the alert to any of the following:
„
F-Secure Policy Manager Console
„
Windows Event Viewer
„
E-mail
„
SNMP.
Figure 4-3 The Alert Forwarding table in F-Secure Policy Manager
You should configure settings in the F-Secure Management Agent /
Settings / Alerting / Alerting Agents branch accordingly.
If you choose to forward alerts to e-mail, you will need to specify the
recipient’s e-mail address. This is done as follows:
1. Click Add to add a new row in the E-mail Address table.
2.
Type the e-mail address on the new row.
3.
Select the types of alerts that are to be sent to this address.
4.
Click Apply .
If you choose to send alerts as e-mails to administrators using the SMTP
protocol, you will need to specify the e-mail address of the recipient as
shown below. This dialog opens once you have selected the e-mail
checkbox in the Alert Forwarding table.
All events are sent to the log file in addition to other
locations you choose.