F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 6.62 - Administrator'S Manual Download Page 184

Page: 184 / 397

184

5.3

F-Secure Anti-Virus for Microsoft Exchange
Statistics

To view statistics, open the

Status

tab from the

Properties

pane and open

the

Statistics

subtree. It displays statistics for the host for each F-Secure

Anti-Virus for Microsoft Exchange installation. If a policy domain is
selected, the

Status

view displays the number of hosts in the domain and

which hosts are disconnected from F-Secure Policy Manager.

Resetting Statistics

You can reset statistics by using controls under the

F-Secure Anti-Virus

for Microsoft Exchange / Operations

branch.

Action on Mails with
Exceeding Nesting
Levels

Specify the action to take on inbound e-mail
messages with nesting levels exceeding the
upper level specified in the

Max Levels of

Nested Messages

setting.

Drop

- E-mail messages with exceeding

nesting levels are not delivered to the
recipient(s).
The nested messages are quarantined if the

Quarantine Problematic Mails

setting under

F-Secure Anti-Virus for Microsoft Exchange /
Settings / Real-Time Processing /
Quarantine

is set to

Yes

Pass Through

- Nested e-mail messages will

be scanned up to level specified in the

Max

Levels of Nested Messages

setting and then

delivered to the recipient(s).

Summary of Contents for ANTI-VIRUS FOR MICROSOFT EXCHANGE 6.62 -














































































































































































































































































































































































































Search results

Summary of Contents for ANTI-VIRUS FOR MICROSOFT EXCHANGE 6.62 -

Reviews:

Related manuals for ANTI-VIRUS FOR MICROSOFT EXCHANGE 6.62 -

Brands by name

Popular brands

F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 6.62 -, Administrator'S Manual

Search results

Summary of Contents for ANTI-VIRUS FOR MICROSOFT EXCHANGE 6.62 -

Reviews:

Related manuals for ANTI-VIRUS FOR MICROSOFT EXCHANGE 6.62 -

Brands by name

Popular brands