XTP II CrossPoint Series • SIS Configuration and Control
48
Command and Response Table Overview
The SIS command and response tables list the commands sent to a device, the responses
returned to the host, a description of the command function or results executing the
command, and some examples of commands in ASCII.
NOTE:
Uppercase and lowercase text are interchangeable unless otherwise stated.
Commands are available for the following functions:
•
(see page 50)
•
(see page 51)
•
(see page 51)
•
Audio Configuration and
Adjustment
(see page 52)
•
(see page 53)
•
(see page 54)
•
VGA Input Configuration and
Adjustment
(see page 54)
•
(see page 55)
•
(see page 55)
•
(see page 56)
•
(see page 57)
•
(see page 58)
•
(see page 58)
•
(see page 59)
•
(see page 61)
•
(see page 61)
•
(see page 62)
The command and response tables throughout this guide use symbols, which represent
variables in the command and response fields. Command and response examples are
shown throughout the tables. The SIS commands are not case sensitive, except for audio
input gain and attenuation commands.
The ASCII to HEX conversion table below is for use with the command and response table.
ASCII to Hex Conversion Table
•
Space
Symbol definitions
]
= Carriage return and line feed
}
= Carriage return with no line feed
| = Pipe (can be used interchangeably with the
}
character).
•
= Space
E
= Escape key
W
= Can be used interchangeably with the
E
character.
Special Characters
The matrix switcher does not accept the following characters for names or passwords:
+ - , @ = ‘ [ ] { } < > ` “ ; : | \ ?
• (space character, acceptable for names)
