Extron electronics XTP II CrossPoint 1600, User Manual

Page: 75 / 113

XTP II CrossPoint Series • HTML Operation 67
Download the Startup Page
Access the matrix switcher using HTML pages as follows:
1. Open a web browser and enter the matrix IP address in the
Address
field of the browser.
NOTE: If the local system administrators have not changed the value, the
factory-specified default, 192.168.254.254, is the correct value for this field.
2. If you want the browser to display a page other than the default page (such as a custom
page that you have uploaded), enter a slash (
/
) and the file name to open.
NOTES:
• The
Address
field of the browser should display the address in the following
format:
< xxx.xxx.xxx.xxx >/< optional_file_name >.html
.
• The HTML language reserves certain characters for specific functions (see Special
Characters on page 48).
3. Press the keyboard
< Enter >
key. The matrix switcher checks to see if it is
password-protected.
If the matrix switcher is not password-protected, it checks and downloads the HTML pages
(proceed to step 6).
If the matrix switcher is password-protected, the matrix switcher asks for your password
(see figure 25).
192.168.254.254
1 1
2 2
Figure 25. Sample Password Inquiry
NOTE: A
User name
entry is not required.
4. Click in the
Password
field (see figure 25,
1
) and type in the appropriate administrator or
user password.
NOTE: For the XTP II CrossPoint 6400 only : the factory set administrator password
is the product serial number. Enter the serial number in the
password
prompt for initial
setup. After initial setup, you may reset the password (see the Reset administrator
password command on page 64, or Passwords Page on page 73).
5. Click the
OK
button (
2
).
6. The matrix switcher checks several possibilities, in the following order, and then responds
accordingly:
•
If the address include a specific file name, such as
192.168.254.254/
< file_name >.html
, the matrix switcher downloads that HTML page.
•
If there is a file in the matrix switcher memory that is named “
index.html
”, the matrix
switcher downloads “
index.html
” as the default startup page.
•
If neither of the above conditions is true, the matrix switcher downloads the
factory-installed default startup page, “
nortxe_index.html
” (see figure 26 on the
next page), also known as the
System Status
page.