XTP II CrossPoint Series • Installation
15
XTP fiber input and output connectors
SIG
LINK
XTP OUT
SIG
LINK
XTP IN
Figure 4.
XTP Fiber Input Connector (Left) and XTP Fiber Output Connector
(Right)
Connect an XTP fiber transmitter to an XTP fiber input connector or an XTP fiber receiver to
an XTP fiber output connector. The cable carries the following signals:
•
Digital video
•
Digital audio
•
Bidirectional RS-232 and IR commands
•
Ethernet communication
•
System communication
WARNING:
Potential risk of severe injury.
The device outputs continuous
invisible light, which may be harmful to the eyes; use with caution.
AVERTISSEMENT :
Risque potentiel de blessure grave ou de mort. Le dispositif émet
une lumière invisible en continu qui peut être dangereux pour les yeux, à utiliser avec
précaution.
•
Do not look into the rear panel fiber optic cable connectors or into the fiber optic
cables themselves.
•
Ne regardez pas dans les connecteurs de câble fibre optique sur le panneau arrière
ou dans les câbles fibre optique eux-mêmes.
•
Plug the attached dust caps into the optical transceivers when the fiber cable is
unplugged.
•
Branchez les protections contre la poussière dans l’ensemble émetteur/récepteur
lorsque le câble fibre optique est débranché.
NOTE:
Ensure the proper fiber optic cable is used. Typically, singlemode fiber optic
cable has a yellow jacket and multimode fiber optic cable has an orange or aqua
jacket.
Pass-through LAN connectors
LAN
Figure 5.
Pass-Through LAN Connector
Connect a control device or a device to control to a pass-through LAN connector for
10/100BASE-T Ethernet communication (see
