XTP II CrossPoint Series • HTML Operation
70
Configuration Tab
System Settings Page
The XTP II CrossPoint Series matrix switcher downloads the
System Settings
page (see
figure 29) when you click the
Configuration
tab (
1
). The screen consists of fields in which you
can view and edit IP administration and system settings. You can access the
Email Settings
and
Passwords
pages by clicking the appropriate link (see
basic information about IP addresses and subnetting).
192.168.254.254
32
2
2
1
1
3
3
4
4
5
5
6
6
7
7
8
8
9
9
¢
¢
£
£
Figure 29.
System Settings Page
On password-protected connections, there are two levels of protection: administrator and user.
Administrators have full access to all switching capabilities and editing functions. Users can
create ties, create and recall presets, set audio mutes, and view all settings with the exception of
passwords.
IP Settings panel
NOTE:
Editing variables in the
IP Settings
panel can immediately disconnect the user
from the matrix switcher. Extron recommends editing these settings using SIS commands
(see
IP- and Remote port-Specific SIS Commands
on page 62) and protecting the
Ethernet access to this screen by assigning an administrator password to qualified and
knowledgeable personnel only.
The
IP Settings
panel (
2
) provides a location for viewing and editing settings unique to the
Ethernet interface. After editing any of the settings on this page, click the
Submit
button at the
bottom of the page to save the changes.
Unit Name field
The
Unit Name
field (see figure 29,
3
) contains the name used as the “from” information when
the matrix switcher e-mails notification of its failed or repaired status. This name field can be any
valid name, up to 24 alphanumeric characters.
NOTE:
The HTML language reserves certain characters for specific functions (see
