XTP II CrossPoint Series • SIS Configuration and Control
47
Other unsolicited messages
The matrix switcher sends the following unsolicited messages when certain operations are
made from the front panel.
Message
Description
Qik
]
Occurs when a front panel tie is created.
PrstS
nn
]
Occurs when a preset is saved from the front panel.
nn
is the preset
number.
PrstR
nn
]
Occurs when a preset is recalled from the front panel.
nn
is the preset
number.
In
nn
•
Aud
xx
]
Occurs when the analog audio input level is changed from the front
panel.
nn
is the input number.
xx
is the audio level in dB.
Out
nn
•
Vol
xx
]
Occurs when the output volume is changed from the front panel.
nn
is
the output number. xx is the volume level in dB of attenuation.
Vmt
nn
*
x
]
Occurs when a video output is muted or unmuted from the front panel.
nn
is the output number.
x
is the mute status (
0
= unmuted,
1
= muted).
Amt
nn
*
x
]
Occurs when an audio output is muted or unmuted from the front panel.
nn
is the output number.
x
is the mute status (
0
= unmuted,
1
= muted).
Exec
n
]
Occurs when the font panel lockout mode is changed from the front
panel.
n
is the lockout mode (
0
= allow front panel operation,
1
= prevent
all font panel operations except changing the lockout mode and viewing
some settings,
2
= prevent front panel operations for audio output
mutes, volume, and remote serial connector protocol and baud rate).
To receive notices of changes made to the matrix switcher from other telnet sockets or a
serial connection, set the verbose mode to modes 1 or 3 (see
the
command on page 65). The notices appear as SIS responses.
