XTP II CrossPoint Series • SIS Configuration and Control
46
SIS Overview
Host and Device Communication
SIS commands consist of one more characters per field. No special characters are required
to begin or end a command sequence. When the matrix switcher determines that a
command is valid, it executes the command and sends a response to the host device. All
responses from the matrix switcher to the host device end with a carriage return and a line
feed (CR/LF =
]
), which signals the end of the response character string. A string is one or
more characters.
Unsolicited Messages
When a local event (such as a front panel operation) occurs, the matrix switcher sends a
message to the host.
Copyright message
(c) Copyright
YYYY
, Extron Electronics,
Model Name
, Vx.xx,
nn-nnnn-nn
]
DDD, MMM dd, YYYY, HH:mm:SS
]
•
YYYY
is the year.
•
Model Name
is the XTP CrossPoint matrix switcher model name.
•
V
x.xx
is the firmware version number.
•
nn-nnnn-nn
is the model part number.
•
DDD
is the three letter day of the week.
•
MMM
is the three letter month.
•
dd
is the numerical day of the month.
•
HH
is the hour.
•
mm
is the minute.
•
SS
is the second.
NOTE:
The matrix switcher reports the day, date, and time only if the host device is
connected through the LAN connector.
Password messages
If the matrix switcher is protected by a password, the password message prompts the user
for the password to access the matrix switcher features.
NOTES:
•
Enabled passwords apply to TCP/IP or Telnet connections only.
•
For the XTP II CrossPoint 6400 only
: the factory set administrator password is
the product serial number. Enter the serial number in the
password
prompt for initial
setup. After initial setup, you may reset the password (see the
Password:
]
When a valid password is entered, the matrix switcher responds with one of the following:
•
]
Login Administrator
]
•
]
Login User
]
The
Login Administrator
response represents administrator access and the
Login
User
response represents user access.
