XTP II CrossPoint Series • HTML Operation
73
Passwords Page
Access the
Passwords
page (see figure 31) by clicking the
Passwords
link (
1
) on the left of
the
System Settings
,
Email Settings
, or
Firmware Upgrade
page.
192.168.254.254
32
192.168.254.254
32
2
2
1
1
2
2
3
3
Figure 31.
Passwords Page
NOTE:
If the matrix switcher is password-protected, fields on this page can be edited
only by people logged in as administrators.
The fields on the
Passwords
page are for entering and verifying administrator and user
passwords. Passwords are case sensitive and are limited to as many as 12 upper-case
and lower-case alphanumeric characters. Each password must be entered twice; once
in the
Password
field and then again in the
Re-enter Password
field (see figure 31,
2
).
Characters in these fields are masked by asterisks (
*****
). If you do not want to password
protect an access level, leave the
Password
field and the
Re-enter Password
field blank.
After entering the password in both fields, click the
Submit
button (3).
NOTE:
An administrator password must be created before a user password can be
created.
Resetting a password
Reset an existing password so that no password is required as follows:
1.
Replace any existing password by entering a single space character in the
Password
and
Re-enter Password
fields (see figure 31,
2
).
2.
Click the
Submit
button (
3
).
