3-9
Digital XPoint Matrix Switchers • Operation
Viewing source status and the current configuration
The LCD can sequentially display the sync status of an input and then the current
configuration. To view the status for a specific input and then the current
configuration, press and release the button for the desired input. The LCD displays
a source status message (figure 3-16) and then the current configuration before
returning to the default display.
— or —
D X P 8 8
E X T RON
STATUS
D e t e c t e d
I n p u t
# 5
N o S y n c
I n p u t
# 5
INPUTS
OUTPUTS
4
_
_ 5
5
_ _ _ 5
1 2 3
5 6 7 8
The LCD displays the input's status.
Detected means that a sync signal
is detected on the input.
No Sync means that no sync signal
is detected.
The LCD displays the ties
for the selected input.
In this example, output 1,
3, and 8 are tied to input 5.
1 Second
Timeout
Source Status Display
Configuration Display
Default Display
Press and release
the input button.
10 Second
Timeout
5
Figure 3-16 — LCD source status display
The source status message consists of the input number and either Detected or No
Sync. To check the status of another source, press and release another input button.
The LCD configuration message displays each output number on the top line and
the tied inputs on the bottom line. Figure 3-16 shows the LCD display cycle that
results after the steps in example 1, example 2, and example 3 have been
completed.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
