Extron electronics DXP 44 SDI, User Manual

Page: 29 / 62

3-13 Digital XPoint Matrix Switchers • Operation
5 . To recall the preset , press and release the Enter button (figure 3-24). The
configuration stored in memory location 5 is now the current configuration.
Press the Enter bu tton to
recall the preset.
CONTROL
ENTER PRESET
STATUS
D X P 4 4
E X T RON
The LCD ret u rns to the
defa u lt display.
All bu ttons ret u rn to u nlit or
b ackgro u nd ill u mination.
Figure 3-24 — Press Enter to recall
Background illumination
The buttons on the front panel can be set to provide amber background
illumination at all times or the background illumination can be turned off. To
toggle the background illumination on or off, press and hold the Input 1 and Input
2 buttons for approximately two seconds.
Executive mode (front panel security lockout)
The executive mode limits the operation of the Digital XPoint switcher from the
front panel. When the switcher is in executive mode, all of the front panel
functions are disabled except for the ability to toggle background illumination on
and off. See Background illumination above.
To toggle executive mode on or off, press and hold the Enter and Preset buttons for
approximately two seconds. When the switcher enters executive mode, the LCD
displays X-Mode Enabled for approximately 8 seconds. The LCD also displays
X-Mode Enabled when a front panel button is pressed while the switcher is in
executive mode. When the switcher exits executive mode, the LCD displays
X-Mode Disabled. Release the Enter and Preset buttons. To toggle the executive
mode state again, press and hold the Enter and Preset buttons again.
System reset to factory defaults
To reset the switcher to the factory default settings, press and hold the Enter button
on the front panel while you plug in the switcher. Continue to hold the Enter
button until the power up sequence is completed (all front panel buttons cycle on
and off from left to right lit green, right to left lit red, and left to right lit amber).
System reset clears all ties and presets, background illumination, and the executive
mode to the factory defaults.
STATUS
E n a b l e d
X - Mo d e
im Vertrieb von CAMBOARD Electronics
www.camboard.de Tel. 07131 911201
Fax 07131 911203 ce-info@camboard.de