4-5
Digital XPoint Matrix Switchers
•
Programmer’s Guide
Command/response table for SIS commands (Cont’d)
Command
ASCII Command
Response
Additional description
(host to switcher)
(switcher to host)
Direct write
of a global preset
Esc
+
X5
P
X3
*
X2
!…
X3
*
X2
! Spr
X5
Directly enters a global preset.
Example:
Esc
+7P5*2!5*3!3*6!4*1!
Spr7
Creates preset 7, consisting of
Input (I) 5 tied to Output (O) 2
and 3, I3 to O6, and I4 to O1.
Executive mode
Lock front panel
1x
Exe1
Enable executive mode.
Unlock front panel
0x
Exe0
Disable executive mode.
Lock status
x
X6
1 = exec mode on, 0 = exec mode
off.
Resets
Reset global presets
Esc
ZG
Zpg
Clear all global presets.
Reset whole switcher
Esc
ZXXX
Zpx
Clears all ties, global presets,
background illumination, and
executive mode.
View ties and presets
View video output tie
X2
%
X3
Example:
7%
02
Output 7 video tied to input 2
video.
View preset configuration
X4
VC
X3
•(4 (DXP 44) or 8 (DXP 88) total)•Vid
Show preset
X4
’s video
configuration. Show the video
input tied to 4 or 8 sequential
outputs.
Response description:
input # (I#) is assigned to output # (O#)•I# assigned to O#+1...I# assigned to O#+7•Vid
Example:
1VC
1
Output:
Response = tied input:
Input 4 tied to output 1
2 3 4 5 6 7 8
4•8•4•6•6•2•0•0•Vid
No tied input
Each position listed in the response corresponds toan output: left = output 1, right= output 8. The number shown in each
position is the number of the input that is tied to the output represented by that position.
Preset 1— Input 4 is tied to outputs 1 and 3, input 8 is tied to output 2, input 6 is tied to outputs 4 and 5, and input 2 is
tied to output 6. No input is tied to outputs 7 and 8.
List individual sync
X1
LS
X7
1 = sync detected, 0 = no sync.
Input sync information is available by request only. No unsolicited responses
are made.
Information requests
Information request
I
V
X
Example:
i
V8X8
8 inputs and 8 outputs.
Request part number
N
xx-xxx-xx
See appendix A for part #s.
Example:
n
60-401-01
DXP 88 SDI part # is 60-401-01.
Query software version
Q
X8
Example:
q
2.00
The version number shown is for
example only.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
