Operation, cont’d
Digital XPoint Matrix Switchers • Operation
3-12
Example 5: View or recall a preset
The following steps show an example in which, on a DXP 44 SDI, the configuration
of a saved preset is shown in the LCD and then recalled to become the current
configuration. Each step shows the front panel indications that result from your
action.
The switch mode, quick or enter, is for ties only and has no effect on recalling
presets.
1
.
Press and release the Preset button (figure 3-21).
1 2 3 4
Press and release the Preset button.
The LCD displays the outputs. The
tied inputs are not shown until you
select a preset.
PRESET
INPUTS
OUTPUTS
Figure 3-21 — Selecting view/recall preset mode
2
.
Press and release the Output 1 button (figure 3-22).
Press and release the Output 1
button. (The Output 1 button
selects preset 5 on a DXP 44 SDI.)
The button lights red.
The Enter button
blinks
red
to indicate
that the preset is
available for recall.
The LCD displays
the preset
'
s
configuration.
Each output is
listed on the top
line. The bottom
line sho
w
s the
tied input.
OUTPUTS
CONTROL
ENTER
PRESET
= Blinking Button
4
_
_ 5
5
1 2 3
1 2 3 4
INPUTS
OUTPUTS
Figure 3-22 — Selecting the preset
3
.
To view a different preset
, press and release a different input or output
button.
4
.
To stop viewing presets without recalling a preset
, press and release the
Preset button (figure 3-23).
Press the Preset
bu
tton to
exit witho
u
t recalling the
preset.
CONTROL
ENTER
PRESET
STATUS
D X P 4 4
E X T RON
The LCD ret
u
rns to the
defa
u
lt display.
All
bu
ttons ret
u
rn to
u
nlit or
b
ackgro
u
nd ill
u
mination.
Figure 3-23 — Press Preset to exit
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
