5-3
Digital XPoint Matrix Switchers
•
Matrix Software
2
.
Select either the comm port that is connected to the DXP’s RS-232/RS-422 port
or Emulate and click OK.
Although IP [LAN] is available for selection, the switcher does not have an
Ethernet port. Do not select IP [LAN].
If you selected a comm port
, proceed to step 3.
If you selected Emulate
, see Using emulation mode in this chapter.
3
.
The Matrix S Control Program window appears (figure 5-2 and
figure 5-3) displaying the current configuration of the connected switcher.
Figure 5-2 — Extron Matrix S Control Program window (blank)
Figure 5-3 — Sample program window showing ties and icons
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
