Operation, cont’d
Digital XPoint Matrix Switchers • Operation
3-6
3
.
Press and release the Enter button (figure 3-7). The input, output, and Enter
buttons return to either unlit or to background illumination. The LCD returns
to the default display. The current configuration is now defined as input 5
tied to output 3, output 4, and output 8.
Press the Enter
bu
tton to
confirm the config
u
ration
change.
CONTROL
ENTER
PRESET
STATUS
D X P
8 8
E X T RON
The LCD ret
u
rns to the
defa
u
lt display.
All
bu
ttons ret
u
rn to
u
nlit or
b
ackgro
u
nd ill
u
mination.
Figure 3-7 — Press Enter
Example 1b: Create a set of ties in quick switch mode
The following steps show an example in which input 5 is tied to outputs 3, 4, and 8
in quick switch mode. Each step shows the front panel indications that result from
your action.
This example assumes that there are no ties in the current configuration.
1
.
Press and release the input 5 button (figure 3-8).
INPUTS
1 2 3 4 5 6 7
8
INPUTS
OUTPUTS
N o S y n c
I n p u t
# 5
_ _ _ _ _ _ _ _
1 2 3 4 5 6 7 8
Press and release the input 5 button.
The button lights
green
.
The LCD displays the input
'
s status (Detected or
No Sync), then the current s
w
itch configuration.
See
Viewing source status and the current
configuration
in this chapter.
1 Second
Figure 3-8 — Select an input
2
.
Press and release the output 3, output 4, and output 8 buttons (figure 3-9).
The output 3, output 4, and output 8 buttons light red as they are pressed to
indicate a created tie. The current configuration is now defined as input 5 tied
to output 3, output 4, and output 8.
Press and release the output 3, 4, and
8
buttons.
The buttons blink
red
to indicate a tie.
The LCD updates the current
s
w
itch configuration display
as each output button is
pressed. See
Viewing source
status and the current
configuration
in this chapter.
After approximately 10
seconds the input and output
buttons return to either unlit or
background illumination.
OUTPUTS
1 2 3 4 5 6 7
8
INPUTS
OUTPUTS
STATUS
D X P 8 8
E X T RON
_ _ 5 5 _ _ _ 5
1 2 3 4 5 6 7 8
10 Seconds
Figure 3-9 — Selec outputs to create ties in quick switch mode
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
