1-3
Digital XPoint Matrix Switchers • Introduction
Features
Inputs
— 4 or 8 SDI video inputs on BNC connectors and 4 or 8 equalized and
buffered loop-throughs on BNC connectors
Outputs
— 4 or 8 SDI video outputs with two buffered and equalized outputs each
on BNC connectors
Serial digital data rates from 143 Mb/s to 360 Mb/s
— Capable of switching signals
in 4fsc (composite) or 4:2:2 (component) serial digital video transmission
standards
SMPTE 259M compliance
Automatic input cable equalization
— Each input signal is equalized: a 270 Mb/s
input signal is equalized for distances of 1000 feet (305 meters) on high
quality cable such as Extron SuperFlex SHR Super High Resolution coaxial
cable.
Input carrier detection
— When input data is locked, the DXP indicates the
presence of a carrier source.
Automatic rate selection
— The Digital XPoint automatically accepts four SMPTE
data rates, including 143 Mb/s, 177 Mb/s, 270 Mb/s, and 360 Mb/s. The
auto rate selection is ideal for multi-rate serial data protocols because the
switcher automatically detects and locks onto the incoming data signal.
Output data muting when the input source is lost
— An internal muting function
forces the serial data outputs to a static state when input data is not present
or not locked.
16 global memory presets
— 16 memory presets are a time-saving feature that lets
you set up and store input/output configurations in advance and then recall
those configurations with a few simple steps when needed.
Operational flexibility
— Operations such as input/output selection and setting of
presets can be performed on the front panel or over the RS-232/RS-422 link.
The RS-232/RS-422 link allows remote control via a PC or control system.
•
Front Panel Controller
— The Digital XPoint Series front panel controller
supports touch-of-a-button input and output selection and preset creation
and selection. The front panel features large, positive touch, illuminated
pushbuttons that can be labeled with text or graphics.
•
Windows-based control program
— Extron’s Windows-based control
program provides a versatile range of operational options with its graphical
interface and drag-and-drop/point-and-click operation. The Windows-based
control program also has an emulation mode that lets you create a switcher
configuration file at the home office and then download it for use by the
switcher on site.
•
Simple Instruction Set (SIS)
— The remote control protocol uses Extron’s SIS
for easy programming and operation.
Remote control
— The Digital XPoint switchers are remote controllable, using the
MKP 1000 master control keypad and any combination of MCP 1000 slave
control panels and/or MKP 1000 slave control keypads. The remote control
devices are easy to use and provide tactile buttons for quick selection. Each
MCP 1000 can be used for one-touch switching for a particular output and for
selecting global presets. Each MKP 1000 dedicated to an output can be used
to select a different input for that output or to select a preset.
LCD display
— The LCD displays the I/O configuration, preset configurations, the
detected input carrier, and the status of additional system features.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
