Extron electronics DXP 44 SDI, User Manual

Page: 23 / 62

3-7 Digital XPoint Matrix Switchers • Operation
Example 2: Add a tie to a set of ties
The following steps show an example in which a new video tie is added to the
current configuration in enter switch mode. Each step shows the front panel
indications that result from your action.
This example assumes that the switcher is in enter switch mode. If the
switcher is in the quick switch mode, output buttons light red rather than
green and the step in which the Enter button is pressed is not necessary.
1 . Press and release the input 5 button (figure 3-10). If the steps in Example 1
have been completed, the output 3, output 4, and output 8 buttons indicate
ties created in Example 1.
INPUTS
1 2 3 4 5 6 7 8
OUTPUTS
1 2 3 4 5 6 7 8
INPUTS
OUTPUTS
N o S y n c
I n p u
4
t # 5
_ _ 5 5 _ _ _ 5
1 2 3 5 6 7 8
Press and release the inp u t 5 bu tton.
The bu tton lights g reen .
The LCD displays the inp u t's stat u s (Detected or
N o Sync), then the c u rrent switch config u ration.
See Viewing so u rce stat u s and the c u rrent
config u ration in this chapter.
1 second
B u ttons for selected o u tp u ts light g reen .
Figure 3-10 — Select an input
2 . Press and release the output 1 button (figure 3-11).
Press and release the output 1
button. The button blinks
green .
The Enter button
blinks
green to
indicate the need to
confirm the change.
OUTPUTS
1 2 3 4 5 6 7 8
CONTROL
ENTER PRESET
Buttons are green to indicate current ties.
= Blinking Button
Figure 3-11 — Select a new input
3 . Press and release the Enter button (figure 3-12). The input, output, and Enter
buttons return to either unlit or to background illumination. The LCD returns
to the default display. The current configuration is now defined as input 5
tied to output 1, output 3, output 4, and output 8.
Press the Enter bu tton to
confirm the config u ration
change.
CONTROL
ENTER PRESET
STATUS
D X P 8 8
E X T RON
The LCD ret u rns to the
defa u lt display.
All bu ttons ret u rn to u nlit or
b ackgro u nd ill u mination.
Figure 3-12 — Press Enter
im Vertrieb von CAMBOARD Electronics
www.camboard.de Tel. 07131 911201
Fax 07131 911203 ce-info@camboard.de