5-7
Digital XPoint Matrix Switchers
•
Matrix Software
Using the Button-Label Generator Software
The program is contained on the same set of 3.5-inch diskettes as the Matrix
S Control Program and is installed automatically when you install that
program.
By default, the installation program installs the program in the C:\MTRX50
directory, and the Button-Label Generator icon is placed in the “Extron Electronics”
group or folder.
1.
To run the Button-Label Generator program, double-click on
the Button-Label Generator icon (shown at right) in the Extron
Electronics group or folder, and click on OK when prompted.
The Extron’s Button-Label Generator window appears
(figure 5-6).
Figure 5-6 — Extron’s Button-Label Generator window
2.
Under System selection, choose SGS 408 (this selection matches the number of
inputs and outputs and the button size of the DXP 88).
3.
Using normal Windows controls, you can create and print labels that can be
placed in the illuminated buttons of the switcher.
For information about using the program, you can access the help program by
clicking on the Help menu on the main screen and choosing Show Help.
You can also see an example of a completed Extron’s Button-Label Generator
window by clicking on the Help menu on the main screen, choosing Show Help, and
clicking on the Load Demo button.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
