Matrix Software, cont’d
Digital XPoint Matrix Switchers
•
Matrix Software
5-6
Frequency read options —
Allows you to set the input signal detection
feature as follows:
•
To never sample and display the sync or no sync status
(set this option to None)
•
To automatically refresh the display
(set this option to Automatically every 10 seconds)
•
To sample the sync and update the display whenever you make
a configuration change
(set this option to On demand or by refresh).
Icons in I/O boxes —
Erases any numbers in the I/O boxes in the
control program window (figure 5-2). You can place icons in
the boxes.
Numbers in I/O boxes —
Erases any icons in the I/O boxes in the
control program window and fills each box with the
associated input or output number.
Using emulation mode
Emulation mode allows you to set up the software without attaching the switcher
to the computer. To use emulation mode, do the following:
1.
Double-click the Matrix S Control Program icon in the Extron
Electronics group or folder.
2.
Choose Emulate, and click OK.
3.
Choose an emulation file to open, and click OK. The file DEMO.MTX
provides a sample of a completed matrix setup. The file NEW.INI provides a
blank setup to get you started.
4.
Enter the file name under which you want to save any changes to the file, and
click OK.
5.
Select the Matrix Model DXP Series.
6
.
Select the correct Video Boards configuration for your model (4x4 or 8x8) and
click OK.
7.
Continue using the program as described in Using the software, steps 3 through
5, beginning on page 5-2.
Using the help system
For information about program features, you can access the help program in any of
the following ways:
• From the Extron Electronics program folder or group, double-
click on the Matrix S Help icon (shown at right).
• From within the Matrix S Control Program, click on
the Help menu on the main screen.
• From within the Matrix S Control Program, press the F1 key.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
