3-7
CrossPoint / MAV Matrix Switchers • Operation
d
Preset button —
The Preset button has two primary functions (•) and three
secondary functions (
❏
):
• Activates
Save Preset
mode to save a configuration as a preset and
Recall
Preset
mode to activate a previously-defined preset.
• Blinks when
Save Preset
mode is active and lights steadily when
Recall
Preset
mode is active.
❏
In the
I/O Group
mode, select group 2 and indicate the selection.
See “I/O grouping” on page 3-24.
❏
With the Enter, View, and Esc buttons, select
Serial Port Selection and
mode. See “Selecting the rear panel Remote port protocol
❏
Select 19200 baud for the rear panel RS-232/RS-422 port in
Serial Port
mode and indicate the selection. See “Selecting
the rear panel Remote port protocol and baud rate” on page 3-54.
e
View (
<
) button —
The View (
<
)
button has one primary function (•) and six
secondary functions (
❏
):
• Select and indicate
View-only
mode, which displays the current
configuration.
N
View-only
mode also provides a way to mute and unmute the outputs. See
“Muting and unmuting video and/or audio outputs” on page 3-35.
❏
In the
I/O Group
mode, select group 3 and indicate the selection.
See “I/O grouping” on page 3-24.
❏
(CrossPoint switchers)
Decrease the RGB delay of switches to the
selected output. See “Setting RGB delay (CrossPoint Switchers)” on
page 3-28.
❏
(Audio models)
Decrease the audio level of the selected input.
See “Viewing and adjusting the input audio level (audio models)” on
page 3-38.
❏
(Audio models)
Decrease the volume of the selected output.
See “Viewing and adjusting the output volume (audio models)” on
page 3-44.
❏
With the Enter, Preset, and Esc buttons, select
Serial Port Selection and
mode. See “Selecting the rear panel Remote port protocol
❏
Select 38400 baud for the rear panel RS-232/RS-422 port in
Serial Port
mode, and indicate the selection See “Selecting
the rear panel Remote port protocol and baud rate” on page 3-54.
Summary of Contents for CrossPoint 450 Plus 2412 HV
