Extron electronics CrossPoint 450 Plus 2412 HV, User Manual

Page: 152 / 214

Matrix Software, cont’d
CrossPoint / MAV Matrix Switchers • Matrix Software
5-16
Serial-port-connected firmware upload
10
11
Figure 5-12 — Firmware loading
10 . Click
Browse
. The select file window appears.
11 . Navigate to the folder where you saved the firmware upgrade file. Select the
file and click
Open
. The Firmware Loader returns to the top.
N
Valid firmware files must have the file extension “.S19”. Any other file
extension is not a firmware upgrade for your matrix switcher.
12 . Click
Upload
. The File Loader advises you that using the Ethernet (LAN) port
is preferred over using either serial port (figure 5-13).
To quit the firmware upload and start over using the LAN port, click the
Cancel button and return to step 3 . Use the LAN port connection in step 3 .
To continue the firmware upload using either serial port connection, click the
OK button. The program prompts you to identify the serial port to which you
are connected. Continue to step 13 .