Extron electronics CrossPoint 450 Plus 2412 HV, User Manual

Page: 157 / 214

5-21
CrossPoint / MAV Matrix Switchers • Matrix Software
Hardware status — Provides an overall view of the status of the matrix switcher,
including the primary and secondary power supply status and the individual
voltages, the fan and temperature status, the Remote RS-232/RS-422 port
configuration, and the installed and updated firmware status (figure 5-15).
Green — Proper operation.
Red — Component has failed.
White —
Not displayed for the
CrossPoint or MAV.
Figure 5-15 — Status window
N
Smaller switchers (16 x 16 matrix sizes and smaller) do not show the power
supply and fan status blocks.
Name presets — Allows you to assign a name to each of the 32 memory presets.
N
Preset names are limited to 12 upper- and lower-case alphanumeric characters,
space, and the _ and / characters. The following characters are invalid in
preset names: + ~ , @ = ‘ [ ] { } < > ’ “ ; : | \ and ?.
Show RS-232 strings — Displays the RS-232 commands that are used by the
current configuration. You can refer to these for SIS programming.
I/O Group settings
— Displays the inputs/iuputs groups window, which allows
you to assign inputs and outputs to any one of four groups (or no group).
Initialize
— Initializes and clears any or all of the following: ties, presets, audio
configuration, preset names, icon names, and icons.
Audio-input Configuration selection
Displays the audio gain level setting for a single input or for all inputs
and allows you to change it. The level is expressed as the magnitude
(number of decibels) and polarity (positive, gain or negative,
attenuation) of the audio adjustment.