Extron electronics CrossPoint 450 Plus 2412 HV, User Manual

Page: 60 / 214

Operation, cont’d
CrossPoint / MAV Matrix Switchers • Operation
3-16
Example 2: Adding a tie to a set of video and audio ties
In the following example, a new video tie is added to the current configuration.
The steps show the front panel indications that result from your action.
N
This example assumes that you have performed example 1.
1 . Press and release the Esc button (figure 3-11).
C O N T R O L
PRESET ENTER
ESC VIEW
Press the Esc button to clear all selections.
The button flashes once.
Figure 3-11 — Clear all selections
2 . To select video only for the tie, if necessary, press and release the RGBHV
(CrossPoint switchers) or Video (MAV Plus switchers) button and the Audio
button (figure 3-12).
I / O
VIDEO AUDIO
Press the RGBHV/Video button to toggle on and off.
The button lights
green when selected.
Press the Audio button to toggle on and off.
The button is
unlit or background illuminated when deselected.
Figure 3-12 — Select RGBHV or video only
3 . Press and release the input 5 button (figure 3-13).
The Output 3, Output 4, and Output 8 buttons light
green to
indicate the RGBHV or video ties created in example 1.
1 2 3 4 5 6 7 8 16
17 18 19 20 21 22 23 24 32
I
N
P
U
T
S
1 2 3 4 5 6 7 8 16
17 18 19 20 21 22 23 24 32
O
U
T
P
U
T
S
Press and release the Input 5 button.
The button lights
green to indicate that video
outputs can be tied to or untied from this input.
Figure 3-13 — Select an input